BSP Mandatory Standards

The following mandatory standards are recommended for this taxonomy node:

• Quality of service ranking and measurement methods for digital video services delivered over broadband IP networks (J.241:2005)
• IP packet transfer and availability performance parameters (Y.1540:2016)
• Network performance objectives for IP-based services (Y.1541:2011)
• Framework for achieving end-to-end IP performance objectives (Y.1542:2010)

Service Profiles

The following CIO serviceprofiles references this taxonomy node. For each serviceprofile, we list the standards which will be used to implement the functionality described in the taxonomy node:

• Anycast DNS Profile
  • Distributing Authoritative Name Servers via Shared Unicast Addresses (RFC 3258:2002)
  • Operation of Anycast Services (RFC 4786:2006)
  • Unique Origin Autonomous System Numbers (ASNs) per Node for Globally Anycasted Services (RFC 6382:2011)
  • Architectural Considerations of IP Anycast (RFC 7094:2014)
• IPv4 Transport Services Profile
  • Path MTU Discovery (RFC 1191:1990)
  • Internet Protocol, version 4 (RFC 791:1981)
  • Ethernet Address Resolution Protocol (RFC 826:1982)
  • A Standard for the Transmission of IP Datagrams over Ethernet Networks (RFC 894:1984)
• IPv6 Transport Services Profile
  • Reserved IPv6 Subnet Anycast Addresses (RFC 2526:1999)
  • Unique Local IPv6 Unicast Addresses (RFC 4193:2005)
  • Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification (RFC 4443:2006)
  • Neighbor Discovery for IP version 6 (IPv6) (RFC 4861:2007)
  • Using 127-Bit IPv6 Prefixes on Inter-Router Links (RFC 6164:2011)
  • Security and Privacy Considerations for IPv6 Address Generation Mechanisms (RFC 7721:2016)
  • Internet Protocol, Version 6 (IPv6) Specification (RFC 8200:2017)
  • Path MTU Discovery for IP version 6 (RFC 8201:2017)
• Inter-Autonomous Systems IP Transport Profile
  • Interface standard for LC connectors with protective housings related to IEC 61076-3-106 (61754-20-100:2012)
  • IEEE Standard for Ethernet (802.3:2018)
  • Information technology -- Generic cabling for customer premises -- Part 1: General requirements (11801-1:2017)
  • Characteristics of a single-mode optical fibre and cable (G.652:2016)
  • Connector, Fibre Optic, Circular Hermaphroditic, Bulkhead, Low Profile Without Strain Relief, Jam-Nut Mount, 2 and 4 Positions, Expanded Beam (MIL-DTL-83526C:2006)
  • Standard for optical connector medium-rate and high-rate military tactical link (AComP-4290 Ed A Ver 2:2019)